SPCOLLECT
Desde Navisphere:
Using Navisphere perform the following steps to collect and transfer the SPCollects to your local
drive:
1 - Login to Navisphere Manager
2 - Identify the Serial number of the array you want to perform the SP Collects on
3 - Go to SP A using expand (+)
4 - Right click on it and from the menu, select SPCollects
5 - Now go to SP B in the same array
6 - Right click on it and from the menu, select SPCollects
7 - Wait for 5 to 10 minutes depending on the how big your array is and how busy your array is
8 - Now right click on SP A and from the menu select File Manager
9 - From the window, select the zip file SerialNumberOfClariion_spa_Date_Time_*.zip
10 - From the window, hit the transfer button to transfer the files to your local computer.
11 - Follow a similar process ( 8, 9, 10) for SPB, from the File Manager
12 - The SP B file name will be SerialNumberOfClariion_spb_Date_Time_*.zip
For customers that do not have SPCollects in the menu (running release 13 below), there is a manual
way to perform SPCollects using Navicli from your management console or an attached host system.
To gather SPCollects from SP A, run the following commands:
navicli -h xxx.xxx.xxx.xxx spcollect -messner
Wait for 5 to 7 mins
navicli -h xxx.xxx.xxx.xxx managefiles -list
The name of the SPCollects file will be SerialNumberOfClariion_spa_Date_Time_*.zip
navicli -h xxx.xxx.xxx.xxx managefiles -retrieve
where xxx.xxx.xxx.xxx is the IP Address of SP A
For SP B, similar process like above, the name of the file you will be looking for is
SerialNumberOfClariion_spb_Date_Time_*.zip
Where xxx.xxx.xxx.xxx will be the IP Address of SP B